SPC flooring cannot be taken as marble or ceramic tile to clean. We should pay attention to the following points when we usually maintain:

Daily cleaning and maintenance:

Remove the dust by soft broom, then mop the flooring with wet mopping. Use the floor cleaning polish to dilute with water at 1:20, and mop the floor with a semi-wet mop.

Complete refurbishment treatment: 　　

Dilute with strong dewaxing water 1:10 and spread it evenly on the ground, wait for 5-10 minutes, clean and dewax at low speed with a floor scrubber and red polishing pad. Use a water suction machine to suck up the sewage in time.　

Wash with clean water and absorb dry until there is no residual detergent on the floor.　　　　

Treatment of special dirt: 　　

1. Oil stains: For local oil stains, pour the stock solution of the water-based degreaser directly on a towel to wipe; for large areas of oil stains, dilute the Vite water-based degreaser at 1:10, then clean it at a low speed with a mopping machine and a red polishing pad.　　

2. Black offset printing: Polishing with spray cleaning maintenance wax, high-speed polishing machine and white polishing pad. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it.　　

3. Gum or chewing gum: Use a professional strong glue remover to pour directly on the towel and wipe it off.